Stopping Squeaks Without Rebuilding the Staircase

Stair Tread Installation & Refinishing in Charlotte for homes with site-built stringers and treads that can be tightened at the source

Stairs that squeak or show wear are usually addressed by tightening the treads to the stringers or replacing the worn boards, but only if the staircase was built on site. The owner can usually repair stairs built on site, but factory-built treads that are glued and stapled together generally cannot be repaired, so the owner inspects the stair before recommending a fix. Joyces Hardwood Floors handles stair tread installation and refinishing in Charlotte with the owner assessing each staircase in person to determine whether repair or replacement is the right approach.


Older Charlotte homes were often framed and finished with site-built stringers and treads, which is why many squeaks here can be fixed at the source rather than by replacing the whole staircase. The owner first determines whether the treads were built on site or are factory-built, because on-site builds can usually be tightened and repaired while factory-built treads glued and stapled together generally cannot be fixed without full replacement. Refinishing follows a sanding and finish process on the treads once they are secured and stable.


Schedule a staircase inspection to determine whether your treads can be repaired, replaced, or refinished.

Why Site-Built Stairs Can Be Repaired and Factory Treads Cannot

Site-built stairs are assembled on location with treads fastened to the stringers using screws or nails, which means individual treads can be removed, tightened, or replaced without dismantling the entire staircase. Factory-built treads are glued and stapled together in a single unit, so loosening or damage requires replacing the entire assembly rather than repairing one tread.


After repair or refinishing, the treads sit firmly against the stringers without movement or noise when stepped on, and the surface is smooth and uniform in color. If treads were replaced, the new boards match the width and depth of the originals so the staircase feels consistent underfoot.


Refinishing stair treads involves sanding each tread to remove the old finish and surface scratches, then applying stain and finish coats to seal the wood. The edges where the tread meets the riser are masked or hand-sanded to avoid damaging adjacent surfaces.

What Property Owners Ask About the Work

Homeowners in Belmont and Matthews often ask about stair repairs and refinishing, especially when squeaks or worn treads affect heavily used staircases in older homes.

  • How does the owner determine whether a staircase can be repaired?

    The inspection looks at how the treads are attached to the stringers, whether fasteners are accessible, and whether the tread construction is site-built or factory-assembled.

  • What causes stair treads to squeak in older Charlotte homes?

    Squeaks usually come from loose fasteners or movement between the tread and stringer, which happens as the wood shrinks or the fasteners back out over time.

  • How are squeaky treads tightened without replacing them?

    Screws are driven through the tread into the stringer from above or below, depending on access, which pulls the tread tight and eliminates movement.

  • What will you notice after stair treads are refinished?

    The treads will have a smooth, uniform surface free of scratches and worn spots, with a finish that matches the selected sheen and color.

  • Why can factory-built treads not be repaired the same way?

    Factory treads are glued and stapled together as a single unit, so individual boards cannot be removed or tightened without dismantling the entire assembly.

Joyces Hardwood Floors also handles stair tread installation and refinishing in Belmont, Bessemer City, Concord, Fort Mill, and Harrisburg. The owner inspects each staircase in person and explains whether repair, replacement, or refinishing is the best option for your home.